服务代理
This commit is contained in:
@@ -20,7 +20,7 @@ This block is written and re-added by `next dev` — verify at `node_modules/nex
|
||||
- 成功抓取文件通过原生 Route Handler 返回；Proxy 仅选择成功出口或准备并改写完整 TSX 404，不能直接从 Proxy 输出文件，否则 Next 会过滤 Content-Length。保留 Go ServeFile 的 MIME、原字节、Last-Modified、Content-Length、Accept-Ranges、304/412/206/416、If-Range/多段 Range 和 HEAD；Next compress=false 避免框架自动压缩改变文件响应，外层代理可沿用原传输配置。
|
||||
- 播放器通过 npm 使用 `xgplayer` 与 `xgplayer-hls`；不要恢复 CDN 脚本版 DPlayer/Hls/Swiper 或旧业务脚本。
|
||||
- `/h5/m3u8/**`、`/enkey`、`/newenkey` 保留服务端媒体转发：签名 query 不重组，UA/IP/Range 保留，上游重定向按原 Go 客户端跟随。签名媒体请求按原合同不附登录 Cookie/Authorization；上游业务 JSON 错误返回 502，不能当播放清单成功响应。
|
||||
- `config/development.env`、`config/test.env`、`config/production.env` 分别管理三套环境，本地覆盖使用忽略提交的 `*.local.env`；进程环境优先。2026-10-16 起开发 API 按用户指定使用 `https://webhuakuiapi.mfcg.me`（替代原 `http://172.104.181.99:30331`），不要擅自切回原站 25319 或旧地址。
|
||||
- `config/development.env`、`config/test.env`、`config/production.env` 分别管理三套环境，本地覆盖使用忽略提交的 `*.local.env`；进程环境优先。2026-10-16 起开发 API 按用户指定使用 `http://127.0.0.1:20032`（替代原 `http://172.104.181.99:30331`），不要擅自切回原站 25319 或旧地址。
|
||||
- SSR 请求准备在 `src/proxy.ts` 完成，通过 `src/server/react/handoff.ts` 向 React 交接；保留同请求 Cookie/页面数据一致性。大快照使用私有临时文件，部署多实例时须处理交接存储共享或实例亲和。
|
||||
- 所有“黄果短剧”统一为“花魁短剧”。占位图品牌 logo 透明度固定为 `0.2`。Figma 文件为 `1vUq4wf5xOs8ZOlmt26Q3O`，读取设计使用本地 `FIGMA_TOKEN` 调用 REST API，不能打印令牌。
|
||||
- 本地 `npm run dev` 默认使用 Webpack；该项目已确认 Next 16.4 Turbopack 开发 HMR 存在循环刷新，未经验证不要改回默认。Charles 调试使用 `npm run dev:charles`，不改业务接口地址。
|
||||
|
||||
@@ -68,7 +68,7 @@ Node 原生代理说明：[Node.js HTTP 文档](https://nodejs.org/download/rele
|
||||
|
||||
配置优先级：进程环境变量 > `config/<环境>.local.env` > `config/<环境>.env`。本地覆盖文件不会提交。`APP_ENV` 选择业务环境；测试环境的优化构建仍使用 Next.js 要求的 `NODE_ENV=production`。
|
||||
|
||||
开发 `UPSTREAM_API_URL` 使用 `https://webhuakuiapi.mfcg.me`；测试服务与 API 同机，使用 `http://127.0.0.1:30331`，测试应用端口为 `30334`。本地运行测试环境且 API 不在本机时，可在 `config/test.local.env` 覆盖上游地址。正式配置使用同机 API `http://127.0.0.1:26931`、服务端口 `26935`，可由部署环境或 `config/production.local.env` 覆盖。构建不访问上游，启动时检查地址。
|
||||
开发 `UPSTREAM_API_URL` 使用 `http://127.0.0.1:20032`；测试服务与 API 同机，使用 `http://127.0.0.1:30331`，测试应用端口为 `30334`。本地运行测试环境且 API 不在本机时，可在 `config/test.local.env` 覆盖上游地址。正式配置使用同机 API `http://127.0.0.1:26931`、服务端口 `26935`，可由部署环境或 `config/production.local.env` 覆盖。构建不访问上游，启动时检查地址。
|
||||
|
||||
```dotenv
|
||||
UPSTREAM_API_URL=https://your-api.example
|
||||
|
||||
@@ -1,5 +1,5 @@
|
||||
APP_ENV=development
|
||||
UPSTREAM_API_URL=https://webhuakuiapi.mfcg.me
|
||||
UPSTREAM_API_URL=http://127.0.0.1:20032
|
||||
# UPSTREAM_API_URL=http://172.104.181.99:30331
|
||||
# The API supplies imgCdn/imgAppUsCdn; this CloudFront source is only the fallback.
|
||||
# Primary public domain; overrides the backend foreverUrlAddr.
|
||||
|
||||
+7
-131
@@ -1,131 +1,7 @@
|
||||
#!/bin/bash
|
||||
# 花魁短剧正式服：检查 → 构建 → Linux 运行包 + MD5 → 跳板机 running.sh。
|
||||
set -euo pipefail
|
||||
|
||||
SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
|
||||
cd "$SCRIPT_DIR"
|
||||
JUMP_HOST="${DEPLOY_JUMP_HOST:-server@116.212.120.2}"
|
||||
JUMP_DIR="${DEPLOY_JUMP_DIR:-/home/server/web_hkdj/h5/nuxt}"
|
||||
# 按正式服约定分别设置：SCP 为 22889，触发 SSH 为默认 22。
|
||||
SCP_PORT="${DEPLOY_SCP_PORT:-22889}"
|
||||
SSH_PORT="${DEPLOY_SSH_PORT:-22}"
|
||||
TARGET_ARCH="${DEPLOY_TARGET_ARCH:-x64}"
|
||||
TARGET_LIBC="${DEPLOY_TARGET_LIBC:-glibc}"
|
||||
PACKAGE_NAME=web_hkdj_h5.tar.gz
|
||||
MD5_NAME=web_hkdj_h5.md5
|
||||
PACKAGE="$SCRIPT_DIR/$PACKAGE_NAME"
|
||||
MD5_FILE="$SCRIPT_DIR/$MD5_NAME"
|
||||
RELEASE="$SCRIPT_DIR/dist/production-linux-$TARGET_ARCH-$TARGET_LIBC"
|
||||
PACKAGE_ONLY=0
|
||||
|
||||
fail() { printf '错误：%s\n' "$*" >&2; exit 1; }
|
||||
step() { printf '\n▸ %s\n' "$*"; }
|
||||
for argument in "$@"; do
|
||||
case "$argument" in
|
||||
--dry-run) DEPLOY_DRY_RUN=1 ;;
|
||||
--package-only) PACKAGE_ONLY=1 ;;
|
||||
-h|--help)
|
||||
printf '用法：%s [--dry-run | --package-only]\n' "$0"
|
||||
printf '默认上传 server@116.212.120.2:/home/server/web_hkdj/h5/nuxt/，SCP 22889，SSH 22。\n'
|
||||
printf '可覆盖 DEPLOY_JUMP_HOST、DEPLOY_JUMP_DIR、DEPLOY_SCP_PORT、DEPLOY_SSH_PORT、DEPLOY_TARGET_ARCH、DEPLOY_TARGET_LIBC。\n'
|
||||
exit 0 ;;
|
||||
*) fail "不支持的参数 $argument；使用 --help 查看用法" ;;
|
||||
esac
|
||||
done
|
||||
[[ "$JUMP_HOST" =~ ^[a-zA-Z0-9_][a-zA-Z0-9_.@-]*$ ]] || fail 'DEPLOY_JUMP_HOST 格式无效'
|
||||
[[ "$JUMP_DIR" =~ ^/[a-zA-Z0-9_-]+(/[a-zA-Z0-9_-]+)*/?$ ]] || fail 'DEPLOY_JUMP_DIR 必须是普通绝对路径'
|
||||
JUMP_DIR="${JUMP_DIR%/}"
|
||||
for port in "$SCP_PORT" "$SSH_PORT"; do
|
||||
[[ "$port" =~ ^[0-9]+$ ]] && [ "$port" -ge 1 ] && [ "$port" -le 65535 ] || fail 'SCP/SSH 端口必须在 1–65535 内'
|
||||
done
|
||||
case "$TARGET_ARCH" in x64|arm64) ;; *) fail 'DEPLOY_TARGET_ARCH 仅支持 x64 或 arm64' ;; esac
|
||||
case "$TARGET_LIBC" in glibc|musl) ;; *) fail 'DEPLOY_TARGET_LIBC 仅支持 glibc 或 musl' ;; esac
|
||||
for tool in node npm tar; do
|
||||
command -v "$tool" >/dev/null || fail "缺少命令 $tool"
|
||||
done
|
||||
node -e 'const [a,b]=process.versions.node.split(".").map(Number); if(a<20 || a===20 && b<9) process.exit(1)' || fail '需要 Node.js >=20.9，推荐 22'
|
||||
node -e 'const [a,b,c]=process.argv[1].split(".").map(Number); if(a<10 || a===10 && (b<9 || b===9 && c<2)) process.exit(1)' "$(npm --version)" || fail '跨平台运行依赖打包需要 npm >=10.9.2'
|
||||
command -v md5sum >/dev/null || command -v md5 >/dev/null || fail '缺少 md5sum 或 macOS md5'
|
||||
for file in config/production.env config/secrets/m3u8.key package-lock.json scripts/prepare-production-runtime.ts; do
|
||||
[ -s "$file" ] || fail "缺少 $file"
|
||||
done
|
||||
[ -x node_modules/.bin/tsx ] || fail '请先执行 npm ci 安装本地依赖'
|
||||
|
||||
if [ "${DEPLOY_DRY_RUN:-0}" = 1 ]; then
|
||||
printf 'DRY RUN：正式环境；Linux %s/%s；只核对，不构建、不连接服务器。\n' "$TARGET_ARCH" "$TARGET_LIBC"
|
||||
node --input-type=module -e 'import {readFileSync} from "node:fs"; import {parse} from "dotenv"; const c=parse(readFileSync("config/production.env")); console.log(` 服务端口 PORT=${c.PORT}；仅打包 config/production.env，不上传本地覆盖。`)'
|
||||
printf ' npm run check → build → bundle → bundle:linux -- %s %s\n' "$TARGET_ARCH" "$TARGET_LIBC"
|
||||
printf ' 保留 standalone 裁剪依赖，仅补目标 Linux Sharp/libvips；不安装完整生产依赖。\n'
|
||||
printf ' tar 根目录：start.mjs、server.js、node_modules、.next、public、config 等\n'
|
||||
printf ' 生成 %s + %s（纯 MD5 hash）\n' "$PACKAGE_NAME" "$MD5_NAME"
|
||||
if [ "$PACKAGE_ONLY" = 1 ]; then
|
||||
printf ' --package-only：生成后结束，不上传。\n'
|
||||
else
|
||||
printf ' scp -P %s %s %s %s:%s/\n' "$SCP_PORT" "$PACKAGE_NAME" "$MD5_NAME" "$JUMP_HOST" "$JUMP_DIR"
|
||||
printf ' ssh -p %s %s %s/running.sh（不带脚本参数）\n' "$SSH_PORT" "$JUMP_HOST" "$JUMP_DIR"
|
||||
fi
|
||||
exit 0
|
||||
fi
|
||||
if [ "$PACKAGE_ONLY" = 0 ]; then
|
||||
for tool in ssh scp tee; do command -v "$tool" >/dev/null || fail "缺少命令 $tool"; done
|
||||
fi
|
||||
|
||||
# 同仓库只能有一次构建/打包/上传，避免并发覆盖同名包或提前触发 running.sh。
|
||||
mkdir -p "$SCRIPT_DIR/dist"
|
||||
DEPLOY_LOCK="$SCRIPT_DIR/dist/.production-deploy.lock"
|
||||
mkdir "$DEPLOY_LOCK" 2>/dev/null || fail "已有正式发布进程或残留锁：${DEPLOY_LOCK}；请先确认该进程已结束"
|
||||
trap 'rmdir "$DEPLOY_LOCK" 2>/dev/null || true' EXIT
|
||||
trap 'exit 130' INT
|
||||
trap 'exit 143' TERM
|
||||
|
||||
step '检查类型和单元测试'
|
||||
npm run check
|
||||
step '构建并整理正式环境 standalone'
|
||||
npm run build
|
||||
npm run bundle
|
||||
step "准备 standalone 精简运行包，仅补 Linux $TARGET_ARCH/$TARGET_LIBC 图片库"
|
||||
npm run bundle:linux -- "$TARGET_ARCH" "$TARGET_LIBC"
|
||||
for file in start.mjs server.js .next/BUILD_ID config/production.env config/secrets/m3u8.key runtime-target.json; do
|
||||
[ -s "$RELEASE/$file" ] || fail "正式运行包缺少 $file"
|
||||
done
|
||||
for directory in node_modules .next/static public; do
|
||||
[ -d "$RELEASE/$directory" ] || fail "正式运行包缺少目录 $directory"
|
||||
done
|
||||
|
||||
step "打包 $PACKAGE_NAME"
|
||||
# -C 保持产物直接位于 tar 根部；禁止 AppleDouble、环境覆盖和日志混入。
|
||||
COPYFILE_DISABLE=1 COPY_EXTENDED_ATTRIBUTES_DISABLE=1 tar \
|
||||
--no-xattrs \
|
||||
--exclude='._*' --exclude='.DS_Store' --exclude='.env*' \
|
||||
--exclude='*.local.env' --exclude='*.log' \
|
||||
-czf "$PACKAGE" -C "$RELEASE" .
|
||||
chmod 600 "$PACKAGE"
|
||||
if command -v md5sum >/dev/null; then
|
||||
md5sum "$PACKAGE" | awk '{print $1}' > "$MD5_FILE"
|
||||
else
|
||||
md5 -q "$PACKAGE" > "$MD5_FILE"
|
||||
fi
|
||||
tar -tzf "$PACKAGE" >/dev/null
|
||||
printf '运行包已生成：%s；校验文件：%s\n' "$PACKAGE_NAME" "$MD5_NAME"
|
||||
node -e 'console.log(`压缩包体积：${(require("node:fs").statSync(process.argv[1]).size / 1024 / 1024).toFixed(2)} MiB`)' "$PACKAGE"
|
||||
if [ "$PACKAGE_ONLY" = 1 ]; then exit 0; fi
|
||||
|
||||
step "上传到跳板机 $JUMP_HOST:$JUMP_DIR/"
|
||||
scp -P "$SCP_PORT" "$PACKAGE" "$MD5_FILE" "$JUMP_HOST:$JUMP_DIR/"
|
||||
step '执行既有正式服 running.sh'
|
||||
# gatekeeper 按完整 .sh 路径放行，不能附参数、cd、bash 前缀或其它命令。
|
||||
RUN_LOG=$(mktemp "$SCRIPT_DIR/dist/production-running.XXXXXX")
|
||||
printf '远端执行日志：%s\n' "$RUN_LOG"
|
||||
if ! ssh -p "$SSH_PORT" "$JUMP_HOST" "$JUMP_DIR/running.sh" 2>&1 | tee "$RUN_LOG"; then
|
||||
fail "正式服 running.sh 执行失败；日志：${RUN_LOG}"
|
||||
fi
|
||||
# 部分既有服务器脚本没有透传 Supervisor 的失败退出码，不能只依据 SSH 返回 0。
|
||||
if ! node - "$RUN_LOG" <<'NODE'
|
||||
const { readFileSync } = require('node:fs');
|
||||
const output = readFileSync(process.argv[2], 'utf8').replace(/\x1b\[[0-?]*[ -/]*[@-~]/g, '');
|
||||
if (/\b(?:BACKOFF|FATAL|ERROR)\b|\bspawn\s+error\b/i.test(output)) process.exit(1);
|
||||
NODE
|
||||
then
|
||||
fail "正式服输出包含失败状态，不能确认发布成功；日志：${RUN_LOG}"
|
||||
fi
|
||||
printf '\n正式服 running.sh 执行完成，未发现失败状态；日志：%s；本地包已保留供排查。\n' "$RUN_LOG"
|
||||
set -e
|
||||
rm -rf dist dist.zip
|
||||
npm run build:prod
|
||||
zip -q -r dist.zip dist
|
||||
# https://dis79itlh8uwv.cloudfront.net
|
||||
scp dist.zip root@172.104.166.87:/tmp/dist.zip
|
||||
ssh root@172.104.166.87 "set -e && rm -rf /tmp/extract && unzip -q /tmp/dist.zip -d /tmp/extract && cd /server/web_huakui/h5/dist/ && rm -rf ./* && mv /tmp/extract/dist/* . && rm -rf /tmp/extract /tmp/dist.zip && echo DEPLOY_OK"
|
||||
|
||||
-124
@@ -1,124 +0,0 @@
|
||||
#!/bin/bash
|
||||
# 花魁短剧测试服：检查 → 构建 → dist.zip → 上传 → Supervisor 重启/健康检查。
|
||||
# DEPLOY_DRY_RUN=1 ./deploy_test.sh 仅核对，不构建、不连接服务器。
|
||||
set -euo pipefail
|
||||
|
||||
SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
|
||||
cd "$SCRIPT_DIR"
|
||||
|
||||
HOST="${DEPLOY_HOST:-root@172.104.181.99}"
|
||||
SSH_PORT="${DEPLOY_SSH_PORT:-22889}"
|
||||
REMOTE_DIR="${DEPLOY_DIR:-/server/hkdj_net/h5}"
|
||||
CHECK_URL="${DEPLOY_CHECK_URL:-https://hkdjneth5.remoces.com}"
|
||||
PACKAGE="$SCRIPT_DIR/dist.zip"
|
||||
CHECKSUM="$SCRIPT_DIR/dist.zip.sha256"
|
||||
|
||||
fail() { printf '错误：%s\n' "$*" >&2; exit 1; }
|
||||
step() { printf '\n▸ %s\n' "$*"; }
|
||||
|
||||
for argument in "$@"; do
|
||||
case "$argument" in
|
||||
--dry-run) DEPLOY_DRY_RUN=1 ;;
|
||||
-h|--help)
|
||||
printf '用法：%s [--dry-run]\n默认目标 root@172.104.181.99:22889 /server/hkdj_net/h5/\n可覆盖 DEPLOY_HOST、DEPLOY_SSH_PORT、DEPLOY_DIR、DEPLOY_CHECK_URL；DEPLOY_DRY_RUN=1 等同 --dry-run。\n' "$0"
|
||||
exit 0 ;;
|
||||
*) fail "不支持的参数 $argument；使用 --help 查看用法" ;;
|
||||
esac
|
||||
done
|
||||
|
||||
# 这些值会作为远端路径/命令使用，仅允许普通 SSH 目标和绝对路径。
|
||||
[[ "$HOST" =~ ^[a-zA-Z0-9_][a-zA-Z0-9_.@-]*$ ]] || fail "DEPLOY_HOST 格式无效"
|
||||
[[ "$SSH_PORT" =~ ^[0-9]+$ ]] && [ "$SSH_PORT" -ge 1 ] && [ "$SSH_PORT" -le 65535 ] || fail "DEPLOY_SSH_PORT 无效"
|
||||
[[ "$REMOTE_DIR" =~ ^/[a-zA-Z0-9_-]+(/[a-zA-Z0-9_-]+)*/?$ ]] || fail "DEPLOY_DIR 必须是普通绝对路径"
|
||||
|
||||
for tool in node npm zip unzip ssh scp; do
|
||||
command -v "$tool" >/dev/null || fail "缺少命令 $tool"
|
||||
done
|
||||
node -e 'const [a,b]=process.versions.node.split(".").map(Number); if(a<20 || (a===20 && b<9)) process.exit(1)' || fail "需要 Node.js >=20.9，推荐 Node.js 22"
|
||||
node -e 'try { const u=new URL(process.argv[1]); if (!["http:","https:"].includes(u.protocol) || u.username || u.password || u.search || u.hash || u.pathname!=="/") process.exit(1); } catch { process.exit(1); }' "$CHECK_URL" || fail "DEPLOY_CHECK_URL 必须是 HTTP(S) 站点根地址"
|
||||
for file in config/test.env config/secrets/m3u8.key deploy/up_next_h5.sh package-lock.json; do
|
||||
[ -s "$file" ] || fail "缺少 $file"
|
||||
done
|
||||
bash -n deploy/up_next_h5.sh
|
||||
|
||||
if [ "${DEPLOY_DRY_RUN:-0}" = 1 ]; then
|
||||
printf 'DRY RUN：测试配置 config/test.env；上游与端口可由服务器 config/test.local.env 覆盖。\n'
|
||||
# 不输出本地覆盖/进程配置中的凭证；只展示仓库公共配置。
|
||||
node --input-type=module -e 'import {readFileSync} from "node:fs"; import {parse} from "dotenv"; const c=parse(readFileSync("config/test.env")); console.log(` API=${c.UPSTREAM_API_URL} PORT=${c.PORT}`)'
|
||||
printf ' npm run check → npm run build:test → npm run bundle:test\n'
|
||||
printf ' dist.zip（不含 node_modules / 本地覆盖）+ SHA-256 → %s:%s/（SSH %s）\n' "$HOST" "$REMOTE_DIR" "$SSH_PORT"
|
||||
printf ' ssh 执行 %s/up_next_h5.sh：安装 Linux 运行依赖 → next/ → Supervisor hkdj_next_h5 → 健康检查\n' "$REMOTE_DIR"
|
||||
printf ' 公网检查 %s：/healthz（test）+ 首页（Next HTML）；此模式不访问域名。\n' "$CHECK_URL"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
step '检查类型和单元测试'
|
||||
npm run check
|
||||
step '构建并整理测试环境 standalone'
|
||||
npm run build:test
|
||||
npm run bundle:test
|
||||
|
||||
for file in start.mjs server.js .next-test/BUILD_ID config/test.env config/secrets/m3u8.key; do
|
||||
[ -s "dist/test/$file" ] || fail "测试包缺少 $file"
|
||||
done
|
||||
[ -d dist/test/.next-test/static ] && [ -d dist/test/public ] || fail '测试包缺少静态资源'
|
||||
|
||||
# Next 本机的原生模块不能直接用于 Linux：远端用 lockfile 安装运行依赖。
|
||||
# dotenv 属于 dependencies，start.mjs 在 npm ci --omit=dev 后仍可加载配置。
|
||||
cp package.json package-lock.json dist/test/
|
||||
step '生成 dist.zip 和 SHA-256（保留本地包便于排查）'
|
||||
rm -f "$PACKAGE" "$CHECKSUM"
|
||||
(
|
||||
cd dist/test
|
||||
COPYFILE_DISABLE=1 zip -q -r "$PACKAGE" . \
|
||||
-x 'node_modules/*' '*/node_modules/*' '*.local.env' '.env*' '*/.env*' '._*' '*/._*' '*.log'
|
||||
)
|
||||
chmod 600 "$PACKAGE"
|
||||
if command -v sha256sum >/dev/null; then
|
||||
sha256sum dist.zip > "$CHECKSUM"
|
||||
else
|
||||
shasum -a 256 dist.zip > "$CHECKSUM"
|
||||
fi
|
||||
unzip -tq "$PACKAGE"
|
||||
|
||||
step "上传到 $HOST:$REMOTE_DIR/"
|
||||
ssh -p "$SSH_PORT" "$HOST" "mkdir -p '$REMOTE_DIR'"
|
||||
scp -P "$SSH_PORT" "$PACKAGE" "$CHECKSUM" deploy/up_next_h5.sh "$HOST:$REMOTE_DIR/"
|
||||
step '执行服务器更新脚本'
|
||||
ssh -p "$SSH_PORT" "$HOST" "/bin/bash '$REMOTE_DIR/up_next_h5.sh'"
|
||||
step "检查公网测试站 $CHECK_URL"
|
||||
if ! node --input-type=module - "$CHECK_URL" <<'NODE'
|
||||
const origin = process.argv[2];
|
||||
async function read(path) {
|
||||
const response = await fetch(new URL(path, origin), { signal: AbortSignal.timeout(4000), redirect: 'error', cache: 'no-store' });
|
||||
if (response.status !== 200) throw new Error(`${path} HTTP ${response.status}`);
|
||||
let text = '', size = 0;
|
||||
const decoder = new TextDecoder();
|
||||
for await (const part of response.body) {
|
||||
size += part.length;
|
||||
if (size > 262144) throw new Error(`${path} 响应超过检查上限`);
|
||||
text += decoder.decode(part, { stream: true });
|
||||
if (path === '/' && text.includes('/_next/')) break;
|
||||
}
|
||||
return { text, type: response.headers.get('content-type') || '' };
|
||||
}
|
||||
for (let attempt = 1; attempt <= 3; attempt++) {
|
||||
try {
|
||||
const [health, home] = await Promise.all([read('/healthz'), read('/')]);
|
||||
let status;
|
||||
try { status = JSON.parse(health.text); } catch { throw new Error('/healthz 返回无效 JSON'); }
|
||||
if (status?.status !== 'ok' || status?.environment !== 'test') throw new Error('/healthz 未命中 Next 测试服务');
|
||||
if (!/^text\/html(?:;|$)/i.test(home.type) || !home.text.includes('/_next/')) throw new Error('首页不是 Next HTML');
|
||||
console.log('公网 /healthz 与 Next 首页检查通过');
|
||||
process.exit(0);
|
||||
} catch (error) {
|
||||
console.error(`公网检查 ${attempt}/3 失败：${error.message}`);
|
||||
if (attempt < 3) await new Promise(resolve => setTimeout(resolve, 1000));
|
||||
}
|
||||
}
|
||||
process.exit(1);
|
||||
NODE
|
||||
then
|
||||
fail '服务器服务已更新，但域名检查失败，请检查 Nginx 和 Cloudflare 回源配置。'
|
||||
fi
|
||||
printf '\n测试服更新完成：%s:%s/next（Supervisor：hkdj_next_h5）\n' "$HOST" "$REMOTE_DIR"
|
||||
Vendored
+2
-2
@@ -1,7 +1,7 @@
|
||||
/// <reference types="next" />
|
||||
/// <reference types="next/image-types/global" />
|
||||
import "./.next-dev/dev/types/routes.d.ts";
|
||||
import "./.next-dev/dev/types/root-params.d.ts";
|
||||
import "./.next/types/routes.d.ts";
|
||||
import "./.next/types/root-params.d.ts";
|
||||
|
||||
// NOTE: This file should not be edited
|
||||
// see https://nextjs.org/docs/app/api-reference/config/typescript for more information.
|
||||
|
||||
@@ -15,7 +15,7 @@ export function installationURL(value: string | undefined, deepLink = false): st
|
||||
export function serverConfig() {
|
||||
const environment = (process.env.APP_ENV || 'development') as AppEnvironment;
|
||||
if (!['development', 'test', 'production'].includes(environment)) throw new Error('Invalid APP_ENV');
|
||||
const upstreamURL = (process.env.UPSTREAM_API_URL || (environment === 'development' ? 'https://webhuakuiapi.mfcg.me' : '')).trim().replace(/\/+$/, '');
|
||||
const upstreamURL = (process.env.UPSTREAM_API_URL || (environment === 'development' ? 'http://127.0.0.1:20032' : '')).trim().replace(/\/+$/, '');
|
||||
if (upstreamURL && !/^https?:\/\//.test(upstreamURL)) throw new Error('UPSTREAM_API_URL must be an HTTP(S) URL');
|
||||
return {
|
||||
environment, upstreamURL,
|
||||
|
||||
Reference in New Issue
Block a user